5 & 6 December 2019
75,287 total views
06
Dec
Business Simulation Training
- Home
- Life, Workshop/Seminar
- Business Simulation Training
CCB ITAuthor
Related Posts
December 4, 2019
/
by CCB IT
Factory Visit from Universiti Teknikal Malaysia Melaka (UTeM)
Factory Visit by Electrical students from Universiti Teknikal Malaysia Melaka (UTeM) 77,226 total views
77,226 total views
0
0
July 2, 2020
/
by syazwani
Part 1 (c) – Conductor
Copper, aluminium and aluminium alloys are common materials. For electrical conductors, the copper has to be 99.9% pure and the aluminium must be at least 99.5% pure. Alloys have slightly lower purity as other composite metals are added for tensile strength. Aluminium are more commonly used for aerial and overheads due to it being lighter…
81,621 total views
0
0
July 6, 2020
/
by syazwani
Part 1 (d) – Conductor
Last week’s post, we shared the composition and material density of copper, aluminium and aluminium alloy. That determines the strength and conductivity of each material. The chart above shows the comparison between copper and three different grades of aluminium. The unique properties of each grade of material makes it suitable for different uses. For instance:…
192,989 total views
0
0
July 15, 2020
/
by syazwani
Part 1 (e) – Conductor
Calculating conductor weight is fairly straight forward. No complex formulas here. Simply multiply the conductor cross-sectional area by the material density of that conductor. Disclaimer: Our product knowledge sharing series is intended for information and educational purposes only. It shall not be construed as a technical guide or guarantee on our part. If you…
84,277 total views
0
0